JAMB Physics 1983 past questions
48 real JAMB UTME Physics questions from 1983, with answers. Here are 5 to try; tap “Show answer” to check yourself.
In a resonance tube experiment, a tube of fixed length is closed at one end and several tuning forks of increasing frequency are used to obtain resonance at the open end. If the tuning fork with the lowest frequency which gave resonance had a frequency f₁ and the next tuning fork to give resonance had a frequency f₂, find the ratio f₂/f₁.
- A. 8
- B. 3
- C. 2
- D. ½
- E. 1/3
Show answer
Answer: B — A tube closed at one end resonates only at odd harmonics: f₁, 3f₁, 5f₁ … The next resonance after the fundamental is 3f₁, so f₂/f₁ = 3.
Which of the following is NOT a vector quantity?
- A. Force
- B. Altitude
- C. Weight
- D. Displacement
- E. Acceleration
Show answer
Answer: B — Altitude (height) has size only, so it is a scalar. Force, weight, displacement and acceleration all have direction.
Consider the three forces acting at O and in equilibrium as shown in Fig. 1. Which of the following equations is/are CORRECT? I. P₁ cos θ₁ = P₂ cos θ₂ II. P₃ = P₁ cos θ₁ + P₂ cos θ₂ III. P₁ sin θ₁ = P₂ sin θ₂

- A. I only
- B. II only
- C. III only
- D. II and III only
- E. I and III only
Show answer
Answer: D — Resolving along P₃'s line: P₃ = P₁ cos θ₁ + P₂ cos θ₂ (II). Resolving at right angles: P₁ sin θ₁ = P₂ sin θ₂ (III).
Which of the following statements about friction is NOT correct?
- A. The force of kinetic friction is less than the force of static friction.
- B. The force of kinetic friction between two surfaces is independent of the areas in contact provided the normal reaction is unchanged.
- C. The force of rolling friction between two surfaces is less than the force of sliding friction.
- D. The angle of friction is the angle between the normal reaction and the force of friction.
- E. Friction may be reduced by lubrication.
Show answer
Answer: D — The angle of friction is the angle between the normal reaction and the resultant of the normal reaction and the limiting friction, not the friction force itself (which is at 90° to the normal reaction). Note: The book printed this question without a number; it is question 4.
A brick at rest on a horizontal table is pulled by a horizontal cord, as shown in Fig. 2. The force of friction on the brick

- A. increases if the pull increases but the brick does not move.
- B. is directed horizontally to the right.
- C. decreases if an identical brick is placed on the first.
- D. is zero if the brick is pulled hard enough to make it slide.
- E. changes if the brick is turned on its side.
Show answer
Answer: A — While the brick stays at rest, static friction exactly balances the pull, so it rises as the pull rises (up to the limiting value).
Practise all 48 questions in a real CBT
Timed like the real exam, with an AI tutor that explains every answer step by step.
Start practising free Already a student? Open this paper